Barra de espaço
Barra de espaço

This tutorial describes a detailed procedure showing how to configure SNMP on a Cisco Catalyst 2960 switch.

YOUTUBE

In our channel you can view the video of this tutorial.



EQUIPMENT LIST

The link below shows a list of the network equipment that I used to implement my network project:

 EQUIPMENT LIST

This link will also show the software that I used to implement my network project.

PLAYLIST

The link below shows a playlist with Cisco switch tutorials.

 PLAYLIST



TUTORIAL

Access the console of your Cisco switch and enter the following commands to enable and configure SNMP on your Cisco switch.

# configure terminal
# snmp-server community VegetaRocks ro
# snmp-server contact Vegeta
# snmp-server location Planet Vegeta


Note! Change the community name, contact and location to reflect your environment.


Save your configuration via the command below

# copy running-config startup-config



On a Linux computer, install the snmpwalk utility and test the SNMP configuration using the following commands.

# apt-get install snmp
# snmpwalk –v2c –c VegetaRocks 192.168.3.35

 

 Note! Change the community name and the switch IP to reflect your network environment.

 

CONCLUSION

This tutorial presented the SNMP configuration process on a Cisco Catalyst 2960 switch.